How to Hire a Carpenter in North Dakota

$26/hr

Find qualified carpenters, verify contractor requirements, and connect with skilled candidates.

Change trade or state

About this Guide

North Dakota carpenters build, repair, install, and finish framing, floors, doors, cabinets, forms, and trim. Strong candidates combine accurate measuring, blueprint reading, tool control, material knowledge, and safety. Use this guide to assess experience, verify requirements, find trained candidates, and compare hiring pathways statewide.

Who's available right now

North Dakota · this week
Live on American Recruits

Verified carpenters are on the market in North Dakota this week

Candidate availability moves week to week. What does not move is the screening: the certifications below are what decide whether someone can be badged onto your site at all.

Search candidates
Available candidates
Steady
Profiles in North Dakota
With current OSHA cards
Most
Verified against the document
Typical time to fill
2–4 weeks
Verified and ready to badge

Understanding different hiring levels

The levels are separated by what the state allows a person to do unsupervised, not by how good they are. Hiring the wrong level is the most common and most expensive mistake on a trade requisition.

ACheapest to hireApprentice / helper

Productive under supervision and cheap, but they cannot be left on a task the state licenses, and they need someone qualified with them.

What they'll actually be doing
  • ✓Material handling and site preparation
  • ✓Assist a qualified hand on installation
  • ✓Housekeeping and tool staging
What they can't do yet — legally
  • ✕Cannot work unsupervised on licensed work
  • ✕Cannot sign off their own work at inspection
What they need to hold
OSHA 10Apprentice registration where the state requires it
Worth doing
Paying for their certifications is the cheapest retention mechanism you have — the card raises their rate with you rather than with the next employer.
Where recruiters stall
Hiring at this level to save money and then needing licensed work signed off is what blows the schedule.
Only hire when
Use them where a qualified hand is already on site and the work is supervised.
JWhat most requisitions needJourneyman / qualified

Works unsupervised and can carry a helper. This is the level almost every requisition is actually describing.

What they'll actually be doing
  • ✓Runs work without supervision
  • ✓Builds from drawings
  • ✓Carries one to three helpers
  • ✓Handles inspection on their own work
What they can't do yet — legally
  • ✕Usually cannot pull permits in their own name
  • ✕Cannot act as the licence-holder of record
What they need to hold
Journeyman card where the state issues oneOSHA 30Current trade-specific safety training
Worth doing
Ask what they ran on their own and who supervised it. The answer separates a journeyman from a long-serving helper faster than any certificate.
Where recruiters stall
Employers accept "in progress" as though it were held. It is not — and on a licensed scope it stops the job.
Only hire when
Hire here for anything that has to proceed without a supervisor standing over it.
MFor scope and sign-offMaster / lead

Runs crews across sites, owns compliance outcomes, and where the trade allows, pulls permits and qualifies the work.

What they'll actually be doing
  • ✓Runs crews across more than one site
  • ✓Owns compliance and inspection outcomes
  • ✓Estimates and scopes packages
What they can't do yet — legally
  • ✕Cannot trade as a business without a contractor licence, insurance and usually a bond
What they need to hold
Master or supervisor card where the state issues oneContinuing education current
Worth doing
Local permit experience is worth more than generic years. Ask which jurisdictions they have pulled in.
Where recruiters stall
Paying master rates for work a journeyman could run is the other half of the level mistake.
Only hire when
Hire here when the scope needs sign-off, sequencing or several crews.

What a carpenter costs in North Dakota

Budget $26.47 an hour for a qualified carpenter in North Dakota, from $23.47 at entry level to $36.90 at the top. Add a quarter to a third on top for payroll taxes, insurance and equipment, and price overtime at time and a half.

Hourly range
$23.47–$36.90
North Dakota · before burden
See the full carpenter salary guide →

Legal & compliance checklist

Check project value, contractor status, insurance, worker coverage, and jobsite requirements. For covered projects, keep license, insurance, WSI, and permit records accessible for project administration and inspection before crews mobilize or subcontractors begin work on site as needed.

Licence & verificationMust haveVerify against the issuing board, not the résumé.0 / 4
0 / 4
Safety & site accessMust haveWithout these they cannot be badged onto most sites.0 / 4
0 / 4
Employment & insuranceMust haveGetting the status wrong is the expensive mistake here.0 / 4
0 / 4
Practical & schedulingSite-drivenDriven by the site rather than by law, but they still stop a start date.0 / 4
0 / 4

Post a Carpenter job in North Dakota

Find verified and skilled candidates in your city

Start Now

Where to find them in North Dakota

Use these programs to connect with trained candidates.

Direct hire

Bismarck State College Carpentry

Nine-month residential program where students build a single-family home.
Typical length9 months
What it costs$11,066.16 resident tuition and mandatory fees
Union hall

NDSCS Carpentry Certificate

Wahpeton certificate covering rough, exterior, interior, and finish carpentry.
Typical length17 credits
What it costs$3,595.67 resident tuition and per-credit fees, plus instructional fees
Contract labour

Quentin N. Burdick Job Corps

Minot pre-apprentice carpentry training for eligible students.
Typical length8 months to 2 years
What it costs$0 for eligible students

Screen them properly

Certificates get a candidate past the first filter. These are the questions that separate the ones who can do the work from the ones who have the paperwork, and they change by level.

Interview questions that actually filter

01What did you do on your last site, task by task?
Why it matters: A specific answer tells you what they have actually held in their hands. A vague one usually means they watched.
02Who signed your hours, and can we call them?
Why it matters: Undocumented hours are the single most common problem at this level, and it is the employer who discovers it later.
03Which tools do you own?
Why it matters: It is a proxy for commitment to the trade, and it tells you what you will be supplying on day one.

Red flags on the résumé

!

Certifications listed with no issuing body or date

!

A licence described as 'in progress'

!

No supervisor anyone can call

!

Three or four employers inside a year

!

Long gaps with no explanation offered

!

Cards that lapsed and were never renewed

How long the hire takes

A realistic schedule for a certified carpenter, from writing the requisition to a badged start. The screening steps are where time is actually lost.

Day 0

Scope and post the role

Day 2–7

Shortlist and verify cards

Day 7–10

Interview and reference

Day 10–14

Offer and drug screen

Day 14–21

Site orientation and badging

Rates by sector

Use state market wages and project-specific prevailing wages.

01 / 03$27.83/hr

Residential Construction

Statewide carpenter median.

+ Varied projects
+ Direct craftsmanship
– Weather exposure
– Changing scopes
02 / 03$27.83/hr

Commercial Construction

Statewide median benchmark.

+ Structured sites
+ Team coordination
– Tight deadlines
– Travel demands
03 / 03$35.87/hr

Public Construction

Davis-Bacon carpenter base rate for specified counties.

+ Published wage
+ Defined classification
– Project-specific
– Fringe separate

Questions employers ask

Does every North Dakota carpenter need a contractor license?▾
No. North Dakota requires contractor licensing when a job exceeds $4,000. It applies to the person or business engaging in construction, including subcontractors. Employees of licensed contractors are not automatically required to hold contractor licenses. Verify who contracts for the work.
What does North Dakota workers’ compensation require?▾
North Dakota requires employers to provide workers’ compensation coverage, with limited exceptions. Workforce Safety & Insurance is the state’s exclusive provider. Coverage applies from the first day and first dollar, so verify coverage before work starts.
Can employers use registered apprenticeship to develop carpenters?▾
Yes. North Dakota Registered Apprenticeship combines paid OJT with related instruction. Apprentices earn wages while training, and employers may receive WIOA OJT reimbursement of up to 50% of eligible wages for four to 26 weeks when requirements are met.

Hire a Carpenter in North Dakota

Post a role and reach OSHA-certified candidates in your area.

Post a JobBrowse Candidates

This guide uses the latest wage data for Carpenters, SOC 47-2031, along with North Dakota contractor requirements, registered apprenticeship information, state training programs, and construction safety credentials.

Last updated October 22, 2026. Rates are market estimates, not guarantees.